What is a push-open sink plug and where to install it?

Push open sink stopper is becoming a popular alternative for a traditional sink plug. This practical device, alsoknown as sprung waste or push button drain, can be installed in baths, sinks and basins. It can make everyday activities far more convenient. A push open sink plug is a very elegant element, suitable for every bathroom and kitchen.

Table of contents

  1. How does a push open sink stopper work?
  2. How to clean a sink plug?
  3. Choosing a push button sink stopper
  4. The importance of the material

Image

placeholder

How does a push open sink stopper work?

An automatic sink plug works thanks to a steel spring located inside. To fill the sink or basin with water, one needs to push the sink stopper - it will plug the drain. Pushing the stopper again releases the water. The product plugs and unplugs the sink automatically.

There’s no need to pull the whole sink stopper out and no additional mechanisms are necessary. Using a push open sink stopper is basically effortless, unlike traditional rubber plugs, which in many cases are very impractical.

How to clean a sink plug?

Another advantage of a push open sink drain stopper is the fact that it’s very easy to clean. You can remove it from the drain and thoroughly clean the sink trap and the plug. After all dirt and filth is removed, you can simply insert it back in the drain.

Choosing a push button sink stopper

Because push-open sink plugs are very popular, many manufacturers sell them installed in their products. If the purchased tank does not contain this element, you can buy it separately. How to choose the right sink stopper? The most important matter involves checking whether the sink is equipped with an overflow. It’s a small opening located at the highest point in a sink, right below the faucet. Its main purpose is preventing the water from overflowing. Thanks to this small drain water cannot escape the tank and flood the room. Manufacturers offer push open sink stoppers for both types of sinks.

The main difference is that a sink plug placed in a basin with an overflow has a specially designed slot. The other type does not contain it.

Image

placeholder

The importance of the material

A bathroom sink stopper is an element that remains in a constant contact with water, chemicals and dirt. Having that in mind, one should choose a model that is made of high quality materials. The most popular material for a sink plug is chromed brass which is resistant to corrosion. The layer of chrome protects it from bacteria. Limescale won’t build up on its surface, making it easy to clean. It’s resistant to scratching, discolouration and deformation that could be caused by strong chemicals.

Push open sink stoppers are produced in various sizes.

Before choosing a particular model, one should measure the size of their basin and then decide which sink plug is suitable. What is more, plugs are classified according to their purpose, therefore one can pick a basin, shower or bathtub stopper. Have you ever used one of them?

How to put sink stopper back in?

Start from inserting the sink stopper into the drain. Put the clevis over the pivot rod and insert it into the drain. Tighten all the screws.

How to install sink stopper?

Slide the sink plug into the drain and place the clevis over vertical stopper rod. Put the horizontal rod into the drain. After making sure that the screws are tight, check if the sink stopper works properly. If needed, adjust the screws.

How to repair sink stopper?

Remove the mechanism from the drain and disassemble it to examine the parts. Find the exact replacements for the faulty elements, install them and put the sink plug back. Test if it holds water.

How to clean sink stopper?

Remove the stopper from the drain. Clean the trap pipe and the sink plug thoroughly and put the device back in the drain.

Header icon

Similar articles

Go back to articles